Services

Powder coating is the toughest finish you can put on metal. It goes on dry as a charged powder, bonds to the bare steel, then cures hard in the oven. The result is a shell that shrugs off road salt, brake dust, fuel, grease, and hard knocks far better than spray paint ever will.

Wheels take a beating. Curb rash, peeling clear coat, baked on brake dust, and winter salt eat away at the factory finish until the bare metal shows through. Powder coating rebuilds that barrier the right way.

Every great metal finish starts with prep. Spraying paint or powder over rust, flaking paint, or road grime guarantees a failed finish. Sandblasting strips away every layer of rot and old coating, leaving clean, raw, etched metal ready to bond.

Dull, oxidation streaked metal ruins the look of hard working rigs and show equipment. Metal polishing takes weathered, chalky surfaces and brings them to a deep, reflective mirror finish that stands out on the road.

When an off the shelf part does not exist, or the one you need is broken, custom fabrication fills the gap. We build steel brackets, truck exhaust stacks, trailer ramp gates, utility body floors, equipment mounts, and structural pieces to your exact specs.

Hudson Valley road salt eats steel. Trailer frame rails rust through, utility truck body floors rot out, and equipment cracks under load. Welding repair cuts out the damage and builds fresh steel back in its place.

Specialty welding covers the jobs that need a careful hand and a real understanding of the metal. High wear surfaces, built up components, and unusual repairs all live here.

Some equipment cannot come to the shop. An excavator with a worn bucket, a tractor broken in the field, a trailer frame that let go on the road. When the part cannot move, the welder has to.

Plasma cutting slices through steel plate with a focused arc, leaving a clean edge that needs minimal cleanup. It is how we shape brackets, gussets, tabs, and custom plates to exact fitment before they get welded.