Dull, oxidation streaked metal ruins the look of hard working rigs and show equipment. Metal polishing takes weathered, chalky surfaces and brings them to a deep, reflective mirror finish that stands out on the road.
We polish tanker truck barrels, fuel tanks, diamond plate trim, intake pipes, exhaust stacks, engine covers, and custom brightwork for trucking fleets, owner operators, contractors, and car owners.
Whether you need a heavy multi stage cut to remove oxidation and road salt haze or a final high luster buff, Devin handles the work in our Wallkill shop.
Before and After Polishing
Drag the divider to see a tanker barrel brought from dull to a mirror finish.
After
BeforeSigns You Need Metal Polishing
Dull, Chalky Oxidation
Exposure to weather and salt has left the metal dull, white, or haze covered. Polishing cuts back to bright metal.
Road Salt Water Spots
Hudson Valley winter salt and hard water have etched spots into the finish that hand washing will not touch.
Pitted Trim and Tanks
Surface pitting and fine scratches dull the shine on commercial tanker tanks and custom trim.
Show Preparation
You want a deep, mirror reflection on truck tanks, intake pipes, or custom fabricated metal work.
How We Work
Clean and De-Grease
We wash away dirt, road tar, and oils to reveal the bare metal surface condition.
Heavy Sanding / Cut
Heavy oxidation, scratches, and salt etching are sanded down with progressive abrasives.
Primary Compound Buff
A high cut polishing wheel compound levels the metal and brings up the initial luster.
Final Mirror Finish
Fine finish rouges and high speed buffs bring out a crisp, cloud free mirror reflection.
Protect and Inspect
We hand wipe and seal the metal so it stays bright on the road.
Commercial Tanks and Brightwork
Tanker tanks and big bright metal surfaces brought from dull and streaked to a mirror finish make an undeniable statement. Trucking companies and owner operators know that clean, highly polished rigs reflect pride and professionalism.
Bare metal parts, exhaust stacks, diamond plate, and custom trim take a heavy beating from Hudson Valley winter salt. Polishing removes the deep salt haze, oxidation, and road tar that ruin metal over time.
Polished bare metal versus a clear powder finish is a common choice. A mirror polished bare surface gives the crispest reflection and can be touched up whenever needed. Ask Devin which approach fits your rig and maintenance routine.
Keeping a mirror polish through a salted winter requires periodic rinsing and light sealants to keep salt brine from etching back into the metal.
Metal Polishing in the Booth & Shop
Devin Finch quotes your job and does the work himself. You deal directly with the person behind the torch, nozzle, and spray gun.
Learn About Finch's Fab →Working hours built for contractors, farms, and car owners who work all day. Drop off after job hours or pick up on Saturday morning.
How We Quote Your Job →Blast, repair, weld, coat, and polish under one roof in Wallkill. Never run your part between three different shops again.
View All 9 Services →Metal Polishing Questions
What metal items does Finch's Fab polish?+
Can heavy salt spots and oxidation be polished out?+
How long does a mirror polish last in winter?+
What is the difference between polished bare metal and clear powder coating?+
Who brings metal polishing work to Finch's Fab?+
How do I get a quote on polishing my tank or parts?+
Related Services
Powder coating is the toughest finish you can put on metal. It goes on dry as a charged powder, bonds to the bare steel, then cures hard in the oven. The result is a shell that shrugs off road salt, brake dust, fuel, grease, and hard knocks far better than spray paint ever will.
SandblastingEvery great metal finish starts with prep. Spraying paint or powder over rust, flaking paint, or road grime guarantees a failed finish. Sandblasting strips away every layer of rot and old coating, leaving clean, raw, etched metal ready to bond.
Custom Metal FabricationWhen an off the shelf part does not exist, or the one you need is broken, custom fabrication fills the gap. We build steel brackets, truck exhaust stacks, trailer ramp gates, utility body floors, equipment mounts, and structural pieces to your exact specs.
Metal Polishing Service Area: Ulster & Orange County, NY
Ready to Get Your Metal Polishing Quoted?
Send over your project details, drop off your parts in Wallkill, or give Devin a call at (845) 527-0065.